 |
 |
 |
中文版的翻译正在进行中。。。The iineo platform features many improvements to the Europlacer machine range such as ahigher feeder count, increased board size, 01005 placement process capability and increased maximum component height. The platform employs the company’s proven core features — Rotary head, intelligent feeders, powerful software — while introducing new technologies with linear motors and digital cameras. iineo is widely configurable, allowing for numerous different possibilities:
handle extra-large PCBs up to 24"W to 64"L. The standard double-head system can handle maximum PCB sizes of 18.1 to 20" with options to handle up to 24" x 28". Both the single and dual-head iineo systems can handle minimum PCB sizes of 2.4" sq, board thickness of 0.020” to 0.177", maximum weight of 6.6lbs and bottom-side board clearance of 1". Additionally, both feature board edge clearance of 0.118" above/ 0.197" below, and fixed front rail transport criteria with a height of 950 mm (adjustable from 890 to 975 mm). Board location for both is full edge clamping with fiducial correction, and both systems feature a SMEMA interface. The single-head iineo features one standard nozzle holder with 40 positions in its “smart” nozzle tool bank, and, provides an additional 40-Position or 20-Position or “special” tool holder for odd forms. The dual-head configuration provides two nozzle holders, each with 40 positions in its “smart” nozzle tool bank. Both systems feature standard placement accuracy of 35 μm (QFPs) to 60 μm (chips), full range of intelligent feeders for 8-88 mm tapes, Intelligent beltfeeder for components in plastic sticks, and tray holders/automatic sequencing of matrix trays. Maximum part number capacity of 264 x 8 mm tapes + 10 “full” JEDEC trays with tray holder = 274 parts. The single iineo has a rotary turret pick-up head on X/Y linear motor gantries with eight pick-ups each (12 pick-ups on Tornado head), while the dual-head iineo features a twin rotary turret pick-up head with either combination of 8 and 12 spindles. Depending on the configuration, the following is possible:
conveyor auto-width adjustment, special nozzle magazines, gripper nozzles, and more. A core objective of the Europlacer concept has always been to protect the investment of its users by seeking upward and downward compatibility of feeders, software, and other ancillaries. This principle also has been applied to the new iineo SMT platform. It means that current users are able to use their existing feeder inventory; therefore, protecting their investment, reducing the configured cost of a new system and ultimately reducing the cost per placement. |